Title: DN Sails - Notice, Special Ruling and New Interpretations 11-21-2011
Post by: Geoff Sobering on November 21, 2011, 01:44:52 PM
The technical committee has issued some interpretations on the DN sail. See the PDF file for the official notice. (http://idniyra.org/tech_comm/DN%20Sails%20-%20Special%20Ruling%20and%20New%20Interpretations%2011-21-2011.pdf) - 1) New interpretation
11/20/2011. In Specification G.8. the leech is a straight line from the head to the clew. Reference Specification G.17 and Interpretations G. Sail. - 2) New interpretation.
11/20/2011. In Specification G.17 the spelling of the word "leach" is corrected to "leech". - 3) Amend the Interpretation G. Sail dated 3/18/89 to read:
11/20/2011 A previous interpretation dated 3/18/89 is amended to read as follows: In Specifications G.8. G.17 and G.24 the location of the forward upper corner of the headboard is determined by projecting a straight line parallel to the luff (excluding the bolt rope) to the point where it intersects with a line projected from the uppermost point of the headboard and perpendicular to the luff. - 4) The Governing Committee announces a special ruling to read:
The IDNIYRA Governing Committee has made a Special Ruling effective 11/20/2011. The batten pockets in all sails made prior to 1/1/2012 shall lie at 90 degrees plus or minus 8 degrees to the leech. These sails may be used in all DN races, including all championships. All other sails must comply with Specification G.8.
Title: Re: DN Sails - Notice, Special Ruling and New Interpretations 11-21-2011
Post by: Ken Smith on November 25, 2011, 10:37:05 PM
The batten pockets in all sails made prior to 1/1/2012 shall lie at 90 degrees plus or minus 8 degrees to the leech.
Did you mean all sails made AFTER 1-1-2012?
Title: Re: DN Sails - Notice, Special Ruling and New Interpretations 11-21-2011
Post by: Geoff Sobering on November 25, 2011, 10:58:17 PM
The batten pockets in all sails made prior to 1/1/2012 shall lie at 90 degrees plus or minus 8 degrees to the leech.
Did you mean all sails made AFTER 1-1-2012?
No. It's a "grandfather clause".
|