DN NA Class  

DN America Forums

November 22, 2024, 08:19:04 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Riff sawn versus quarter sawn  (Read 9193 times)
Sunfish1909
Newbie

Posts: 53


« on: July 29, 2011, 09:44:52 AM »

Any disadvantages to using riff sawn ash for a plank? Quarter sawn board the end grain runs almost perpendicular to the faces. Riff sawn is more like 30 to 45 degrees.
Logged

Sunfish1909
Bob Gray
Class Member
*
Posts: 194


« Reply #1 on: July 29, 2011, 03:25:25 PM »

  I've made a good many planks and I can't really say that I've ever had any quarter sawn ash. The grain in ash is so squirrley it's hard to saw what the grain is. I have never had a failure using regular ash. I like to use strips 2" or less wide and reverse the ends on every other strip to keep warping to a minimum.
Logged
Ken Smith
ADMIN

Posts: 289


sail often, travel light


« Reply #2 on: December 22, 2011, 07:00:18 PM »

I strip built a plank a few years ago, and started with fairly flat grain, so the strips were nearly quarter sawn.  I had grain run-out, meaning the major grain was angled to a few strips and entered and left the strip in a span of less than ten inches.

The first day of use, in a fairly stiff breeze, I heard a bang, but everything felt fine, so I kept sailing.  Later I found the strip failed in tension along one of the wandering grain lines.  This strip was the one closest to the leading edge.  I used 3/8 x 5/4 thick strips and a pine core.  And got zero plank life because of grain selection.

So choose wisely.  You are the wood grader.
Logged

Ken Smith
DN4137US
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC3 | SMF © 2001-2006, Lewis Media Valid XHTML 1.0! Valid CSS!