DN NA Class  

DN America Forums

November 28, 2024, 10:29:30 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: DN land yacht  (Read 10494 times)
bmintz
Newbie

Posts: 30


« on: December 02, 2011, 03:21:10 PM »

Has anyone made a DN into a land sailor?  It seems like a very simple and possible project, I just cannot find anything out about it.  Any thoughts from anyone?
Logged
wnethercote
Class Member
*
Posts: 111


« Reply #1 on: December 04, 2011, 05:26:20 PM »

I don't have a link off-hand, but DNs are a one-desgn class within the land-yachting fleets in europe (who mostly sail on beaches or old airports, given the shortage of salt-lakes there   Smiley).
Logged
Ken Smith
ADMIN

Posts: 289


sail often, travel light


« Reply #2 on: December 22, 2011, 06:48:19 PM »

Yes there was a one design sub-class sailed at NALSA about 18 years ago.  Bob Shumacker, Kent Hatch, and Bob Dill promoted the class, and provided simple conversion plans, adding a short spring board that attached with clamps around a hull so no mod was needed.  Steer with a small wheel, and a plank with an axle and go cart tires nearly completed the conversion.  An out of boat experience on the playa is not fun, and at the time a tech committee inspected all competitors, a seat belt was required.

The open class for land yachts is based on actual sail area, which includes the mast and boom.  A DN has 71-73 square feet of actual sail area, depending on boom and mast lengths.  This puts in in Class III with high aspect ratio skeeter-like types and winged yachts, which are much wider, taller and faster.  We sailed in sportsman class, as a one design class and had fun.  This was before composite masts were wide spread, and the boats did not perform as one might expect of a modern DN.

Go to teh NALSA yahoo group or NALSA.org for more information on events and schedules.

The rules are: 
Class II   121.6 sq. ft. maximum (11.3 sq. m.)
Class III   79.1 sq. ft. maximum (7.35 sq. m.)
Class IV   59.0 sq. ft. maximum (5.48 sq. m.)
Class V   49.0 sq. ft. maximum (4.55 sq. m.)
Sportsman One design classes   will be determined through entries, (minimum fifteen entries for separate start), and upon request of the class involved. One design, minimum five yachts, can be scored separately and a trophy presented by prearrangement with NALSA. One design yachts must meet class regulations
Logged

Ken Smith
DN4137US
DNUS1006
Newbie

Posts: 10



« Reply #3 on: December 22, 2011, 07:51:24 PM »

 Very interesting , Ken. Are there any drawings anywhere on how to attach the wheels?
Logged
Ken Smith
ADMIN

Posts: 289


sail often, travel light


« Reply #4 on: December 24, 2011, 07:10:30 PM »

Weld a stub axle to a steel plate drilled to chock pattern and replace chocks.
Logged

Ken Smith
DN4137US
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC3 | SMF © 2001-2006, Lewis Media Valid XHTML 1.0! Valid CSS!