DN NA Class  

DN America Forums

November 21, 2024, 04:15:10 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Riser block  (Read 31150 times)
dnus4925
Newbie

Posts: 35


« on: March 21, 2016, 08:21:42 PM »

Does anyone make the carbon riser blocks that I have seen on a few boats?
Logged
Geoff Sobering
Class Officer
***
Posts: 461



WWW
« Reply #1 on: March 21, 2016, 10:17:49 PM »

All the ones I know of were built by the sailor.
Maybe Jeff Kent?
Logged

Man Why You Even Got to Do a Thing
wnethercote
Class Member
*
Posts: 111


« Reply #2 on: March 22, 2016, 07:37:51 PM »

Mine is a chunk of dead carbon fibre hockey stick.  If you don't have young hockey players of your own, troll the neighbourhood early on a winter garbage day.
Logged
DN 5449
Class Member
*
Posts: 369


« Reply #3 on: March 23, 2016, 07:18:42 AM »

What is the main purpose of having a deck riser?
Logged
KB [us5219]
Class Member
*
Posts: 248



WWW
« Reply #4 on: March 23, 2016, 07:46:24 AM »

Saw one break off the deck of a certain silver fleet racers boat.  It cost  him a possible win in one race. 
The rationale, is that more deck clearance makes it easier to get around under the boom, steer, tack, Jibe, etc...
Logged
MICHAEL
Class Member
*
Posts: 114


2007 Western Regions Gull Lke


« Reply #5 on: March 23, 2016, 08:04:44 AM »

Not needed if you slide body forward and duck your head sideways during tacks and jibes. JD demonstrated this to me a few years back and it works!
Logged

Mike DN5369
Geoff Sobering
Class Officer
***
Posts: 461



WWW
« Reply #6 on: March 23, 2016, 02:55:29 PM »

I put a riser block on my boat this season so I could rake the mast a bit further forward in high wind (I had run out of room to lower the sail any further).

I have to admit that the extra bit of room in the cockpit sailing in high wind is really nice.
I'm a big guy and with the sail down all the way some of the basic sailing operations (ex. switching the sheet from one hand to the other) become very difficult.
With the boom at a medium-wind height I found I could keep "my head out of the boat" all the time in the high winds at the NAs and my sailing was much better.

Cheers,

Geoff S.
Logged

Man Why You Even Got to Do a Thing
wnethercote
Class Member
*
Posts: 111


« Reply #7 on: March 23, 2016, 06:55:26 PM »

My riser block is allows me to reduce rake to carry the boom nearer to horizontal without having the two front blocks come together.  More space for me is just a happy accident.
Logged
Bob Rast DN1313
Newbie

Posts: 148



WWW
« Reply #8 on: March 24, 2016, 09:25:27 AM »

I started using just a piece of 1x1 aluminum for a riser  and worked fine
Went to 2 inch height
It allows a little more height for boom and less interference with tiller and sheeting
Never liked the pinned in the boat with boom on top of tiller and shoulder
Easy getting under boom and better visibility as you can sheet out a little and look under the boom when crossing traffic
Mine pulled out on the NA twice which cost a couple of good finishes but that won't happen again
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC3 | SMF © 2001-2006, Lewis Media Valid XHTML 1.0! Valid CSS!